DIY OSD update
Filed under: Development, FPV, Hardware, Robots, Video
Late update, but video is working as expected, GPS is working to some extent, but because of local weather I havent really tested it outdoors… I’m considering changing video transmitter and power system however. I’m currently running on 1S 160mAh batteries with a stepup regulator to 5v to a 10mw transmitter, which gives a really lousy battery time for the video system, also I’ve got too many batteries flying around at the moment I think.. Limiting to a bit fewer might be a good idea. Currently, there’s a battery for the video link/osd, one built into the camera, one for motor/rc receiver/servos, and one in the rc transmitter, 4 batteries in total of various sizes etc… a pain to charge them all. Hooking up the videolink and OSD to ESC/BEC is a trivial change and would remove a lot of cruft (stepup module etc), but will also add the EMC from motor/ESC to handle for the videolink etc as it’s a completely separate system today.
I’ve also upgraded so I’m using a mobius actioncam. Everything all in all means the system will draw more power and weigh more as well. Removing some batteries and running from the mains system would be really nice.